REact 15 E

Electric Actuator
All valves are available with an electrically-operated actuator. These
actuators provide higher actuating forces than comparable pneumatic
actuators.
A wide range of operating voltages and actuating speeds are
available for each actuator version, ensuring the actuator is tailor made
for each application.
Due to the inherent stiffness of the gear wheels
and motors these actuators effectively buffer high fluid dynamic forces
experienced in extreme flow conditions.
A variety of accessories, including
feed-back potentiometers, positioners, hydraulic and electrical fail safe
units are available for these actuators, providing the best range in industry.

Approved according to industrial standards like NEMA, NRTL, CE and IP.

2 Robust modular industrial design covering a wide range of actuating
forces, speeds and operating voltages.

3 Wide range of options available including feedback potentiometer,
positioner and two extra limit switches as standard.

Technical data
Type REact 15 E REact 15 DC
Operating force 1,5 kN
Closing force 1,7 kN
Stroke max. 35 mm
Speed 0,38 mm/s 0,28 mm/s 0,38 mm/s 0,57 mm/s 1,14 mm/s
Power draw 13,2 VA 4,5 W 5 W 6,2 W 8,6 W
Isolation class B
Motor voltage 24 V AC-50/60 HZ 24 VDC
115 V AC-50/60 HZ
230 VAC -50/60 HZ

Motor rating standard S1
Limit switches 1 switch
Protection rating IP 65, DIN VDE 0470
Ambient temperature -20 °C bis +70 °C
Mounting position beliebig, jedoch Antrieb nicht nach unten hängend
Gear lubricant Divinol Fett Central, NlGI Klasse 0
Cable glands 3 x M16
Weight 4,2 kg
Optional accessories
2 additional limit switch 2 additional circuit board is necessary
Contact rating 5 A, 250 V
Potentiometer 1 kΩ
2 kΩ
5 kΩ
Position indicator REtrans4W, 3-wire 0(4) – 20 mA
REtrans2W, 2-wire 0 – 10 V
Digital positioner REpos
Input 0(4) – 20 mA bzw. 0(2) – 10 V
Output 0(4) – 20 mA bzw. 0(2) – 10 V
Heater 24 V / 3 W