Allweiler AEB 1L Series Progressing Cavity Pump

Tecflow AEB 1L
The AEB1L is a close coupled block design Progressing Cavity Pump for pumping neutral or corrosive liquids, uncontaminated or abrasive liquids, liduis containing gases or which tend to froth and liquids of low or high viscosity including liquids containing fibrous and solid material.

With it´s 2/3 lobe design of rotor and stator it is a very compact pump and operates without almost no pulsation.

Brand:
Allweiler
Category
Pumps > Progressing Cavity
Markets
Commercial Marine
Industrial
Oil & Gas
Power Generation
Industrial > Environmental Engineering
Industrial > Mining and Mineral Processing
Industrial > Chemical
Product Design:
Block Design
Construction features

Block design (Motor attached to pump via flange or lantern)
Pedestal mounting
Dry installation
Horizontal installation
Pump drive directly coupled or by gear or belt transmission
Self - priming
Reversible pumping
2 / 3 lobe geometry

Other data

Solids:
60.00%
Design standard:
Machinery Directive 2006/42/EG
Fluids:
Oils > Crude Oil,
Mixes > Bilge,
Sewage (black & grey water),
Sludge,
Waste Oil/ Slop Oil,
Oil/ water Emulsion,
Slurries,
Mixes > Beverages,
Confectionary
Sealing:
Packing,
Single Mechanical seal,
Double Mechanical seal,
API Cartridge Seals
Certification:
ATEX
Performance data

Series AEB 1L

Capacity Q up to 2700 l/min
Discharge pressure pd up to 16 bar
Differential pressure pdiff up to 4 bar
Viscosity v up to 200000 mm²/s
Fluid temperature t up to 100 °C
No. Stages - up to 1 -

Benefits

Low pulsation
Self priming
Low shear & gentle fluid handling
Bi-directional flow capability (CW & CCW)

Flow rate

Max gpm:
713.30
Max lpm:
2700.00
Max m³/hr:
162.00
Min gpm:
2.10
Min lpm:
8.00
Min m³/hr:
0.50

Viscosity

Max cSt [mm²/s]:
200000.00

Max diff pressure

Max bar (dp):
4.00
Max psi (dp):
58.00

Temp

Max C°:
100.00
Max F°:
212.00
Min C°:
-10.00
Min Fº:
14.00

Pressure class

Pressure class (ANSI):
125,
150
Pressure class (metric):
PN 16
Contact