- Design
- Mechanical
- Fluid
- Manufacturing
- Category Tags
- Brand
- Houttuin
- Product Type
- Pumps > Two-screw
- Room Temp
- Yes
- Pressure Differential
- Maximum: 10bar-d
- Pressure Discharge
- Maximum: 10bar-d
- Driver
-
Magnetic 3000 1/min
- Fluid Temperature Range
- Maximum: 80°C
- Flow Capacity
- 490m³/h
- Fluid Type
- Oil, Lubricating
- Construction Features
- Bearing
- Design Types
- submerged
Product Description
Two-Screw pump up to PN 10, vertical submergedThe Houttuin double entry screw pumps series 215 are rotating self-priming positive displacement pumps.
Self-priming submergible screw pump for lubricating liquids
The Houttuin double entry twin screw pumps series 215.10 are vertical rotating self priming positive displacement pumps. The pump is constructed for subergible application and has therefore a very good NPSH-value. Two inter-meshing screws rotating in a pump casing ensure high pumping efficiency with constant axial flow and unequalled suction power.
Construction
The spindles are supported and axially held in position by ball bearings. The transmission of torque from the driven spindle to the idler spindle is effected by product lubricated timing gears in an attached gearbox. The ball bearings and timing gears maintain a small clearance between the screws, thus preventing metal to metal contact.
Shaft sealing
Product lubricated single unbalanced mechanical seal
Overload protection
For protection against overload a built-on spring loaded relief valve can be supplied.
Applications
For pumping lubricating oils, hydraulic oils or other lubricating fluids which do not contain abrasive substances nor chemically attack the pump materials. As lube oil pump in ship and offshore engineering, as filling pumps in tank farms and in hydraulic systems.
Products
Lubricating oils
Hydraulic oils
Clean fuel oils
Labelling
Main lub oil pumps
Auxiliary lub oil pumps
Hydraulic systems
Fuel oil transfer systems
Performance data | |||
Capacity Viscosity range Temperature of pumped liquid Inlet pressure Outlet pressure Difference pressure Speed Flanges | Q V t ps pd dp n | up to 490 m³/h 20 to 760 cSt up to 80 ºC not applicable up to 10 bar up to 10 bar up to 2900 rpm according to DIN or ANSI |
Inquire About This Product
Fill out the form below for information about this product or to learn more about our brand.
Contact Houttuin
General
Emailcc@circor.comSales
Emailcc@circor.comCustomer Service
Emailcc@circor.com