• Design
  • Mechanical
  • Fluid
  • Manufacturing
  • Category Tags
Design
Brand
Imo
Product Type
Pumps > Three-screw
Related Industries
General Industry
Mechanical
Pressure Differential
Maximum: 2bar-d
Pressure Inlet
Maximum: 10bar-d
Pressure Discharge
Maximum: 1886bar-d
Driver
Magnetic
Fluid
Fluid Temperature Range
Maximum: 176°F
Flow
Maximum: 264ft³/h
Flow Capacity
1000l/min
Viscosity
1mm²/s to 2000mm²/s
Manufacturing
Construction Features
Bearing
Categegory Tags
Design Types
base plate
Installation
horizontal, vertical, dry, in-tank

Product Description

Three-Screw pump Single Suction up to 90 bar

Product Features

EMTEC pumps are designed to withstand the harsh environment of high pressure machine tool coolant service. Special hardening techniques produce wear resistance within the housing bores offering cost effective pumping.

Balance diameters at the inlet end of the idler rotors provide hydraulic balance eliminating thrust loads due to differential pressure. These diameters are grooved to better pass contaminant, are hardened to resist wear and rotate within hardened journals. Like the idler rotors, the power rotor (drive shaft) includes a hardened and specially grooved balance piston and hardened journal. It provides the counteracting force to eliminate thrust loads on the shaft due to differential pressure. It is extra long to minimize flow loss. Leakage crossing the balance piston provides cooling flow to the mechanical shaft seal before being returned to pump inlet. In the case where the pump is mounted vertically within the coolant supply tank, the shaft seal can be eliminated for further cost effectiveness. Leakage across the balance piston is then allowed to escape back to the coolant supply by leaving a seal chamber exit tap unplugged. A lip seal on the pump side of the ball bearing prevents coolant splash from washing out the bearing grease.

Performance shown at a viscosity of 1.8 centistokes, speed of 3500 RPM

Differential Pressure – PSI
Size1002003004005006007008009001000110012001300
20-38GPM8.27.67.16.76.46.15.85.55.24.94.84.54.3
BHP2.63.344.85.56.26.97.688.79.410.110.8
20-46GPM10.910.39.79.28.88.58.17.87.57.16.86.76.4
BHP2.83.85.95.76.67.68.29.11010.911.812.713.6
20-56GPM15.114.113.212.511.911.310.7
BHP3.24.55.37.28.59.410.7
40-38GPM16.515.114.113.112.311.510.710.19.48.78.27.67
BHP2.43.96.86.88.39.410.812.313.715.115.817.218.6
40-46GPM2321.620.419.618.717.917.216.515.915.214.614.113.5
BHP2.94.96.68.510.412.314.216.117.21920.922.724.5
80-36GPM31.229.327.626.325.123.92321.921.120.119.318.517.8
BHP4.16.89.111.714.316.218.721.223.726.228.731.233.7
80-46GPM46.444.442.841.440.239.138.137.136.235.234.533.632.9
BHP5.38.851.850.148.647.446.144.943.842.741.740.739.8
140-39GPM59.65754.953.251.650.248.847.546.445.244.14342
BHP6.911.719.920.424.929.534.138.743.347.952.45761.6
140-46GPM7976.574.572.771.269.768.367.165.964.763.762.661.6
BHP8.314.625.225.931.837.843.849.755.761.767.673.676.1
210-40GPM9692.389.887.585.583.681.980.378.877.275.874.573.2
BHP11.21830.732.439.746.954.161.468.675.879.586.493.3
210-46GPM12211911611411211010810610510310210199.4
BHP13.121.737.639.848.95867.176.285.390.399108116
280-43GPM142139136133131129127125123121120118117
BHP16.42741.848.358.969.576.686.896.9107117127138
280-46GPM162158156153151148146145143141139138136
BHP17.829.853.953.965.974.58697.5109120132143155
440-40GPM202197194190187184182180177175173171169
BHP23.938.953.968.980.294.6109123138152166181195
440-46GPM260255251248245242240237235233231229227
BHP29.249.16981.699.8118136155173191209228246

Emtec Series Specifications

Casing- Cast iron inlet and discharge covers.

Housing- Cast iron with laser hardened bores.

Rotors- Nitride hardened alloy steel.

Shaft Seal- Silicon carbide on silicon carbide, fluorocarbon fitted mechanical seal. Optionally, pumps can be supplied without shaft seal for vertical in-tank mounting. In this case, the seal chamber is drained overboard.

Bearing- Permanently grease packed external ball bearing.

O-Rings- Fluorocarbon.

Viscosity- 1.0 cSt minimum for differential pressure to 870 PSI (60 BAR). 1.8 cSt minimum for differential pressure to 1300 PSI (90 BAR.) 9000 SSU (2000 cSt) maximum.

Inlet Pressure- 145 PSIG (10 BAR) maximum.

Outlet Pressure- 1300 PSIG (90 BAR) maximum.

Differential Pressure- Operation at differential pressures below 40 psi (2.8 BAR) may require pump modification to assure sufficient shaft seal cooling flow. Consult Imo Pump.

Temperature- 0 to 210°F (-18 to 100°C)

Drive/Rotation- Direct drive, clockwise rotation only facing pump shaft.

Speed- 3600 RPM maximum.

Mounting- Shaft end flange mounting, horizontal or vertical, shaft up.

Connections- SAE 4-bolt flange pads for use with 3000 PSI rated 4-bolt flanges, metric bolts.

Filtration- A fine degree of filtration compatible with the expected type and quantity of contaminant will maximize pump service life.

Accessories- Completely mounted pump/driver assemblies with baseplates or NEMA ‘C" face motor adapters are available.

Resources

${ scopeObj.totalResults } results

${ result.relatedBrands[0].lvl0 }
Corporate

${ result.title }

Inquire About This Product

Fill out the form below for information about this product or to learn more about our brand.

Contact Imo

Personal Information

Contact Information

Your Inquiry

SALES PARTNER LOCATOR

CIRCOR has sales partners located in countries around the world. Search below to find the sales partner closest to you.

Find Near Change Location