- Category Tags
- Product Type
- Pumps > Three-screw
- Related Industries
- General Industry
- Construction Features
- Design Types
- base plate
Product DescriptionThree-Screw pump Single Suction up to 10 bar
The 413IC pump is designed for vertical, deep well submerged operation for unloading barges, small tankers or tanks. The pump discharge is axial along the shaft. The design incorporates a third idler rotor which suppresses vibration and noise when pump is lightly cavitated.
Nominal flow rate, GPM/LPM, at 100 PSI (6.9 BAR), 200 SSU (43 CST)
Series 413IC Specifications
Rotor Housing- Bronze
Power Rotor- Alloy steel, hardened.
Idler Rotors- Alloy steel, hardened.
Bearing- Internal carbon graphite sleeve
Outlet Pressure- 150 PSIG (10.3 BAR)
Inlet Pressure- Static head to static lift.
Viscosity- 33 to 20,000 SSU (2.0 to 4300 CST). Lower viscosity ranges require lower allowable differential pressures.
Temperature- 0 to 300°F (-18 to 149°C).
Drive- Direct only.
Rotation- Counterclockwise facing pump shaft.
Mounting- For vertical, deep well mounting.
Filtration- Standard pump is equipped with an inlet strainer having 1/4 inch (6.4 MM) openings.
Connections- Inlet is the screened end of the pump. Discharge is through openings in the shaft end of the pump.
Maximum Speed*- 1500 RPM
* Assumes minimum inlet pressure requirements are met.
Inquire About This Product
Fill out the form below for information about this product or to learn more about our brand.